Volume 2, Issue 2, June 2017, Page: 66-72
Lean Production Planning for 5 Axes CNC Driven Milling Machine
Sandor Bodzas, Department of Mechanical Engineering, University of Debrecen, Debrecen, Hungary
Bela Krakko, Diehl Aircabin Hungary Ltd., Nyirbator, Hungary
Received: Jan. 29, 2017;       Accepted: Mar. 3, 2017;       Published: Mar. 15, 2017
DOI: 10.11648/j.mlr.20170202.14      View  1302      Downloads  57
The aim of this publication is to determine the OEE (Overall Equipment Efficiency) indicator for a 5 axes milling machine found at Diehl Aircabin Hungary Ltd. for the present and future state. Based on this value, the utilization of the machine for the given production amount can be calculated. With the optimal choice of the right production parameters (the number of cuts, feeding, depth of cut, etc.) greater productivity can be achieved i.e the machine main time (time of cutting) will be less. The possibilities of the reduction of the machine time will be analyzed and calculated.
OEE Value, Production Planning, Lean, Milling Machine
To cite this article
Sandor Bodzas, Bela Krakko, Lean Production Planning for 5 Axes CNC Driven Milling Machine, Machine Learning Research. Vol. 2, No. 2, 2017, pp. 66-72. doi: 10.11648/j.mlr.20170202.14
Copyright © 2017 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
BODZÁS S: Gyártástervezés MAKA típusú CNC vezérlésű 5 tengelyes marógépre, thesis, LEAN profession, University of Debrecen, Debrecen, 2016, p. 67.
BERTA M.: CNC szerszámgépek szerszámrendszerei, Collage of Nyíregyháza Publisher, Nyíregyháza, p. 155, ISBN 978 615 5545 03 0
DUDÁS I.: Gépgyártástechnológia I., A gyártástechnológia alapjai, 2. edition, Műszaki Könyvkiadó Ltd., 2011, Budapest, p. 584, ISBN 963-16-4030-2
MÁTRAI N.: Lean Menedzsment presentations, University of Debrecen, Debrecen, 2016
PÉCZELY GY., PÉCZELY CS., PÉCZELI GY.: Lean 3, Termelékenységfejlesztés egységes rendszerben, A. A. Stádium Diagnosztikai és Menedzsment Ltd., Budapest, 2009, p. 690, ISBN 978-963-08-3163-5
WILSON, L.: How to implement Lean Manufacturing, Second Edition, 2015, p. 419, ISBN 978-0-07-183573-2
BÁLINT L.: A forgácsoló megmunkálás tervezése, 2. kiadás, Műszaki Könyvkiadó Kft., 1961, Budapest, p. 883
KLOCKE, F.: Manufacturing Processes I, Cutting, RWTH Edition, RWTH Aachen University, p. 524, ISBN 978-3-642-11978-1
SCHEY, J. A.: Introduction to Manufacturing Processes, McGraw – Hill Book Company, 1977., p. 392., ISBN 0-07-055274-6
BRALLA, J. G.: Handbook of Manufacturing Processes, First Edition, Industrial Press Inc., New York, 2007, ISBN 0-831 1-3179-9
YOUSSEF, H. A., EL HOFY, H.: Machining Technology, Machine tools and operations, CRC Press, United States of Amerika, p. 672, ISBN 978-1-4200-4339-6
Browse journals by subject